Technical Highlights
The most technically advanced oil filter you can buy, here’s why!
  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • 7 times the flow of comparable paper oil filters
  • Magnetic Prefiltering
  • Billet aluminum filter case doubles as an oil cooler
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • No more cutting apart messy paper filters for trapped debris inspection
  • Proven in Motorsports, Military and Aerospace applications for years
  • No more oily paper filters to the landfills
  • May be the last oil filter you'll buy
  • "Inspect, Clean, Reuse"
Technical Highlights
  • 1. Both Spiral Lock and Twist Lock designs eliminate the need for multiple piece housings reducing the potential for leaks and eliminating dental filter disassembly while still mounted on the engine.
  • 2. Twist Lock design simplifies element installation and removal.
  • 3. The Quad-Ring Gasket doubles the seal between the filter and the engine.
  • 4. The filter housing is carved out of a solid chunk of 6061T6 billet aluminum, which not only looks trick but ads in dissipating heat.
  • 5. A super strength nickle-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil.
  • 6. The filter element is made from medical grade, type 304 stainless steel micronic filter cloth, to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI
  • 7. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above the normal engine operating temperature. All glues are non-aerosol, non-CFC adhesives with zero environmental impact.
  • 8. Progressive rate, flow through bypass design simplifies cleaning.
Unique Design, Top Quality Materials and Construction
The Go Green oil filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean.

The twist lock design assures positive filter element placement and allows for easy disassembly, inspection and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of a solid chunk of 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.